Troubleshooting Guide: Common Laser Engraving Problems and Solutions
It's crucial to be able to resolve any equipment problems as a provider of laser engraving services. This manual offers advice and fixes for some of the most typical laser engraving issues. Issue: The engraving is too shallow. Cause: Either the focus is incorrectly set or the laser beam's power is too low. Solution: Modify the strength or concentration until the desired outcome is attained. Issue: The engraving is dirty Cause: Either the material being etched is not smooth enough, or the wavelength of the laser is not set to the proper width. Solution: The laser beam width should be adjusted, or a finer material should be used. Issue: A blurry or dark engraving Cause: Vector lines are cutting less deeply than anticipated. Solution: Set the vector lines' depth appropriately. Issue: Laser does not fire Cause: The laser may be getting too hot. Solution: Inform personnel and let the laser cool. Issue: The machine won't output for the laser engraver Cause: Either ...